Industrial Dehumidifier
Home > Products > Industrial Air Conditioner
Industrial Air Conditioner
This industrial air conditioner is designed for injection molding machines and functions similar to domestic air conditioners. It is applicable to controlling the ambient temperature around an injection mold. Too much moisture in the air may affect the quality of the mold surface because of condensation forming on the molded surface. This industrial air conditioner is ideal for controlling moisture and maintaining consistent quality in molded products.
The industrial air conditioner is used for pre-form injection molding machines. The air conditioner is linked to the mold through a built in blower. The evaporator and the condenser process moist air into dry cold air. The dry, cold air is then blown into the mold chamber to minimize moisture. The air conditioner fills the mold chamber with cold air and totally eliminates condensation on the mold surface as it cools. The air compressor forces refrigerant into the evaporator to absorb heat. When the air flows through the evaporator, moisture condenses. The blower then delivers cold, dry air into the mold chamber removing any condensation on molded surfaces.
Relative Products
Copyright © Yu Ting Refrigerator Co., Ltd. / TEL: +886-4-2406-6766 / FAX: +886-4-2407-0666
No.12-6 Lane 159, Sec.1, Kuo Kuang Rd., Ta Li Taichung, Taiwan, R.O.C.