410KW AIR COOLED SCREW CHILLER FOR FOR SHEET PRODUCTION AND THERMOFORMING WITH EXTRUDER

410KW AIR COOLED SCREW CHILLER FOR FOR SHEET PRODUCTION AND THERMOFORMING WITH EXTRUDER


We have one customer send us inquiry for air cooled screw chiller as below:We kindly please you to be so kind and send us information, your proposal, your buget offer for the following application : Application : PET Sheet extrusion line with a capacity of 1200 kg/h, TPET material,thickness of film (average : 400 mycrons

Maximmum sheet thickness : 800 mycrons

Minimum sheet thickness : 0,25 mycrons.

Three thermoforming machines, each with a capacity of ca 350 kg/h (mold chilling in principal). All production of sheet is thermoformed

One laminating machine (chilling for the rolls, 50% of the production is PET sheet laminated with PE (solventless lamination)

The total power needed for chilling the water is of 355000 kcal/h (ca 410 kW)

The average annual temperature is between -5 degrees in winter and 35 degrees Celsius in summer.

Maximum values are : minimum 20 degrees Celsius in winter and 42 degrees Celsius in summer

The unit must bdeliver the foollowing chilling capacities (two sections)- section one , for the extrusion line, : 244 kW. Input temperature in the chiller, ca 15-17 degrees Ceslisus. Necessary output from the chiller : 10-12 degrees Celsius. Admissible variation : +/- 2 degrees celsius- section 2 , for thermoforming and rest : 166 kW, input temperature to the chiler ca 20 degrees Celsius, chilled water need is 14-15 degrees Celsius. Permitted variation : +/- 3 degrees Celsius

The chiller will be positionned under a shed, outdoors.

We are looking with big interest to receive your proposal, the soonest possible.

410KW AIR COOLED AIR COOLED